The 2510 and 2510-2 particle counters provide a range of particle size measurement from 0.5 to 25.0 μm at a flow rate of 1.0 CFM (28.3 LPM). These sensors allow for efficient particle counting with specifications that exceed the ISO 21501-4 and JIS B9921 calibration standards.
These sensors have 4 fixed particle size channels and are equipped with an integral critical orifice and flow sensor to provide a stable flow rate from an external vacuum source. Integration into a building automation or facility monitoring system is easy via isolated RS-485 Modbus communication.
Model | 2510 | 2510-2 |
Size Range | 0.5 μm to 25.0 μm | 0.5 μm to 25.0 μm |
Size Channels | Factory calibrated at 0.5, 1.0, 2.5, and 5.0 μm | Factory calibrated at 0.5 and 5.0 μm |
Number of Channels | 4 channels | 2 channels |
Counting Efficiency | 50% @ 0.5μm; 100% for particles > 0.75 μm per JIS | |
Flow Rate | 1.0 CFM (28.3 LPM) | |
Concentration Limits | 1,500,000 particles/ft3 @ 10% coincidence (per ISO 21501-4), 3,000,000 particles/ft3 @ 10% coincidence (as tested and validated1) | |
Light Source | Long life laser diode | |
Zero Count | < 1 count / 5 minutes (< 1 particles / 15ft3). No fault count subtraction | |
Calibration | NIST traceable | |
Vacuum Requirements | External vacuum > 15” (38.1cm) of Hg | |
Airflow | Internally monitored | |
Alarm | Alarm LED ring | |
Communication Modes | MODBUS™ RTU, ASCII outputs (over isolated RS-485), or 4-20 mA analog Output | |
Standards | ISO 21501-4 and JIS B9921 | |
Instrument Calibration | Recommended minimum once per year | |
External Surface | Stainless steel | |
Dimensions (L x W x H) | 1.83” x 3.59” x 5.01” (4.6 x 9.1 x 12.7 cm) including probes and connectors | |
Weight | 1.65 lb. (0.75 kg) | |
Accessories | Wiring Connector, operating manual on USB flash drive | |
Optional Accessories | Power Supply, Remote Mounting Bracket, Stainless Steel Barbed Isoprobe (1.0 CFM/28.3 LPM), Filter Assembly, and Sample & Vacuum Tubing | |
Sample Time | 1 second to 18 hours | |
Power | 9 - 24 VDC (< 2.5 watts) | |
Operating Conditions | 41° to 104°F (5° to 40°C) / 20% to 95% non-condensing | |
Storage Conditions | 32° to 122°F (0° to 50°C) / Up to 98% non-condensing | |
Warranty | 2 year limited warranty. Extended warranties available |